排列5走势图

排列5走势图0571-88614168

新闻中心

  • 线束加工质量检测重点是哪些
  • 本站编辑:杭州耐而电子有限公司发布日期:2019-12-19 19:41 浏览次数:

为了保证线束加工厂加工的线束质量问题,要求在线束质量检测里面注意以下的几个环节:

In order to ensure the quality of the harness processed by the harness processing plant, the following links shall be paid attention to in the quality inspection of the harness:

1、CAIXIAN:JIANCHADIANXIANDECHICUNSHIBUSHIFUHEXIANGGUANDEYAOQIU,XINGHAOZHENGBUZHENGQUE。QIEKOUYIDINGYAOZHENGQI,BUNENGHUASHANGDIANXIAN,BINGQIEDIANXIANBUNENGYOUZANGWUDEQINGKUANGFASHENG。

排列5走势图1. Wire cutting: check whether the wire size meets the relevant requirements, and the model is not correct. The cut must be neat, and the wire shall not be scratched, and the wire shall not be dirty.

2、BIANZUCHULI:JIANCHAXIUJIANSHIBUSHIZHENGQI,CHICUNDUIBUDUI,ZAIXIUJIANBIANZUDESHIHOUBUNENGHUADAOXINXIAN。

排列5走势图2. Group processing: check whether the trimming is neat and the size is correct. When trimming the group, the core line cannot be drawn.

3、BOWAIPI:JIANCHABOPIKOUSHIBUSHIZHENGQI,BOPIDECHICUNDUIBUDUI,BUNENGBOSHANGBIANZUSIYIJIXINXIAN。

3. Peeling: check whether the peeling mouth is neat, whether the peeling size is correct, and not to peel the marshalling wire and core wire.

4、BONEIPI:JIANCHABOPIKOUSHIBUSHIZHENGQI,BOPIDECHICUNDUIBUDUI,YOUMEIYOUJIANGXINXIANBOSHANG,YOUMEIYOUBODUANTONGSI;ZAIBANBODESHIHOUJUEYUANTIYIDINGBUNENGTUOLUO。

排列5走势图4. Endothelium peeling: check whether the peeling mouth is neat, whether the peeling size is correct, whether the core wire is peeled, and whether the copper wire is peeled; the insulator must not fall off during the half peeling.

排列5走势图5、TAOSHOUSUOGUAN:ZIXIJIANCHASHOUSUOGUANDEXINGHAOYIJICHICUNSHIBUSHIZHENGQUE。

排列5走势图5. Sleeve shrink tube: carefully check whether the model and size of shrink tube are correct.

2-1F921134H9-50.jpg

6、YUBEIHANXI:JIANCHAXILUDEWENDUDUIBUDUI;ZAIYUBEIHANXIZHIQIANYAOBAXINXIANHETONGSIZHENGLIHAO,JIANCHAYOUMEIYOUWANQU、FENCHAHEDAZHEDEQINGKUANG。

6. Prepare soldering tin: check whether the temperature of the tin furnace is correct; before preparing soldering tin, make sure the core wire and copper wire are well arranged, and check whether there is bending, bifurcation and discount.

7、HANXI:JIANCHADIANLUOTIEDEWENDUZHENGBUZHENGQUE;BUNENGBAJUEYUANPITANGSHANG,XIDIANYAOGUANGHUA,MEIYOUXIJIAN,BUNENGXUHANHEJIAHAN。

7. Solder: check whether the temperature of the electric soldering iron is correct; do not burn the insulating skin, and the solder spot shall be smooth, without solder tip, without false soldering or false soldering.

8、DUANZIYAZHE:JIANCHADUANZIHEDIANXIANDEGUIGESHIBUSHIZHENGQUE;DUANZIYAZHEYOUMEIYOUQINGXIE、YOUMEIYOULAMAKOUDEQINGKUANG。

8. Terminal crimping: check whether the specifications of terminals and wires are correct; check whether the terminals are crimped with tilt and Lama mouth.

排列5走势图9、DUANZICHARU:JIANCHADUANZIHELIANJIEQIDEXINGHAOSHIBUSHIZHENGQUE;DUANZIYOUMEIYOUBIANXINGYIJISUNSHANGDENGQINGKUANG;JIANCHADUANZIYOUMEIYOUCUOCHA、LOUCHAHUOZHESHICHARUBUDAOWEIDEQINGKUANG。

排列5走势图9. Terminal insertion: check whether the model of terminal and connector is correct; whether the terminal is deformed or damaged; check whether the terminal is wrongly inserted, missed or not inserted in place.

10、ZUZHUANGWAIQIAO:JIANCHAWAIQIAOYOUMEIYOUHUASHANG、ZHUANGCUOHUOZHESHIMAOBIANDENGQINGKUANG,YOUMEIYOULOUZHUANGBUJIAN,LUOSIYOUMEIYOUYANGHUA、SONGDONG、NINGMAOYIJIBIANSEDENGQINGKUANG。RUGUOWAIQIAOSHIYOUFANGXIANGDE,NEIMEJIUYIDINGYAOGENJUYAOQIULAIJINXINGZUZHUANG。

10. Assembly of shell: check whether the shell is scratched, wrongly installed or burred, whether there are missing parts, whether the screws are oxidized, loose, screwed and discolored. If the housing is oriented, it must be assembled according to the requirements.